
Microprocessor Control (CPU)
Low-loss serial controller
PWM-controlled constant-voltage charging
Battery charging with automatic charging mode selection (float, boost, equal)
Automatically adjusts to the voltage level 12 V/24 V
Current-dependent load deactivation
Automatic load reactivation
Temperature compensation
Grounding on the plus side
Integrated self test (start voltage 17.0 V)
LEDs to display the battery charge status
LEDs (red/green)to display the function status
Max module input short circuit current at 2510A
Max load output current at 25 10A
System voltage: 12 V / 24 V
Max voltage of Solar collector: 47 V DC
USB output voltage (continuous): 5.0V DC,800mA
Boost charging: 14.4V / 28.8V
Equalisation charging : 14.7V / 29.4V
End-of-charge voltage(float): 13.9V / 27.8V
Enclosure protection class: IP 32
Temperature compensation: -4 mV / K / Zelle
Ambient temperature allowed: -25+50
Terminal size(fine/single wire): 2.5 mm 2/4 mm 2
Dimensions(LxW xH): 145x90X39mm
Compliant standards: CE, EN61000
Microprocessor Control (CPU)
Low-loss serial controller
PWM-controlled constant-voltage charging
Battery charging with automatic charging mode selection (float, boost, equal)
Automatically adjusts to the voltage level 12 V/24 V
Current-dependent load deactivation
Automatic load reactivation
Temperature compensation
Grounding on the plus side
Integrated self test (start voltage 17.0 V)
LEDs to display the battery charge status
LEDs (red/green)to display the function status
Compliant standards: CE,