Structural Features

The product with dry-type iron core is divided into two types of three-phase and single-phase.

Iron core adopts high-quality cold rolled silicon steel sheet so that the reactor could be operated in low temperature rise and low noise.

Reactor's coil adopts high-quality insulated wires.

All clamping elements were passed the anti-corrosive treatment, and main clamping elements adopted non-magnetic material. Coils and iron cores were made into a whole by the advance technical process. These measures could reduce the operating temperature and noise observably, improve reactor quality factors and weaken the influence of harmonics.

Reactor boundary dimensions were designed by normal cabinet dimensions, so its volume could be smaller and wiring was more convenient. Therefore, users cost of the cabinets would be reduced.

Working Environment

Altitude: 2000m

Operating temperature:-25~+45

Relative humidity: 90%

No harmful gas, inflammables and explosives in surround.

Well-ventilation. Ventilation should be added if reactors need to be equipped in the cabinet.

Technical Parameters

• Applicative capacitor voltage: 0.4kV, 0.45 kV, 0.48 kV, 0.525 kV, 0.66 kV, 0.69 kV.
• Reactance ratio: 1%, 4.5%, 5%, 5.6%, 6%, 7%, 12%, 13.8%, 14%.
• Withstand voltage: 5kV/min
• Insulation grade: B, F, H
• Noise: 30dB
• Overload capacity: 1.35 times keep working
• System voltage will rise with the serial reactor. Calculation formula:
• Reduction formula between reactor capacity, capacitor capacity, reactor ratio and inductance value