
CPU | QCA9531 |
CPU nominal frequency | 650MHz |
CPU core count | 1 |
Architecture | MIPS |
RAM | 128MB |
FLASH | 16MB |
10/100 Ethernet ports | 2 |
Supported input voltage | POE: 802.3 aF 24V0.5A |
Max power consumption | 8W |
Dimensions | 180mmx90mmx28mm |
Operating system | Linux |
USB slot type | 0 |
Serial port | 0 |
LED | One of tree colour |
Button | Yes |
Temperature Range | Operation Temperature: -10oC to +50oC Storage Temperature: -20oC to +60oC |
Humidity | 0%~90% |
Wireless standards | IEEE802.11 b/g/n |
Wireless rate | 300Mbps |
RF Frequency | Radio I: 11b/g/n: 2.412~2.484 GHz |
Modulation | OFDM: BPSK, QPSK, 16-QAM, 64-QAM |
Working Channels | North America 11, Japan 14, Europe 13 |
Wireless mode | 802.11 b/g/n |
Channel Bandwidth | 20MHz/40MHz |
Working Mode | AP/WDS/Ad-Hoc/Monitor |
Receiver Sensitivity | |
802.11 b(Mbps) | Receiver signal level(dBm) FER < 8% (PSDU=1024Bytes)
11Mbps: -86dBm / 5.5Mbps: -93dBm |
802.11 g (Mbps) | Receiver signal level(dBm) FER < 10% (PSDU=1024Bytes)
6Mbps: -91dBm / 9Mbps: -89dBm |
802.11n HT20(MCS) | Receiver signal level(dBm) FER < 10%(PSDU=1024Bytes)
MCS0/MCS8: -83dBm; MCS1/MCS9: -80dBm |
Effective Radiated Power (dBm) | 802.11b: 1Mbps-11Mbps: 27dBm
802.11g: 6Mbps-9Mbps: 26dBm / 12Mbps-18Mbps: 25dBm 802.11n: MCS0/MCS8: 22dBm; MCS1/MCS9: 25dBm |
System Requirements | ||||
Management: WEB(http1.0 /1.1)
Browser Support: Microsoft IE 6.0 or above, Fire fox 2.0 or above | ||||
System Status | ||||
Overview | hostname
model software version | local time
uptime memory information | network information
DHCP v4/v6 information wireless/associated stations information | |
Firewall | Reset and Restart firewall services
Display all kinds of firewall tables information, includes FILTER, NAT, MANGLE and RAW | |||
Routes | Display ARP information
IPv4/6 routes information | |||
Log | Display system up information and kernel log | |||
Real-time monitor | Display real-time load information, include traffic, wireless and connections | |||
Processes | Display currently running system processes and their status | |||
System Configure | ||||
System configure | User can configure the basic aspects of the device, includes hostname and time zone and also could configure system log basics information, include buffer size, external system log server IP/port
Time synchronization | |||
Administration | User could change administrator password
SSH access | |||
Software | Remove/install software packages
opkg configuration | |||
Startup | Enable/disable installed init scripts
Customize local startup | |||
Scheduled tasks | Customize scheduled tasks in the system crontab | |||
Firmware upgrade | User could upgrade system firmware image
Backup/Restore configuration | |||
Reboot | Reboot the system | |||
Network Configure | ||||
Interfaces | Display interfaces include LAN/WAN basics status
User could configure global network options Add new interface | |||
Wireless | Display wireless basics configuration
Display associated stations | |||
Switch | User can configure VLAN | |||
DHCP and DNS | User could configure DHCP and DNS | |||
Hostname | User could configure device hostname | |||
Static Routers | Routes specify over which interface and gateway a certain host or network can be reached
Add static IPv4/IPv6 routers | |||
Diagnostics | User could use ping/traceroute/lookup tools to diagnostics | |||
Firewall | Firewall creates zones over your network interfaces to control network traffic flow
Add Port forwards Traffic Rules Add Custom Rules | |||
Logout | Logout the system | |||
Feature List | ||||
Easy Setup | Internet/Wireless setting, 3G backup Setting | |||
Network | WAN: DHCP / Static IP / PPPoE / L2TP / PPTP / 3G
LAN Setting Static DHCP Setting | |||
Wireless | Wireless Status
Basic Setting MAC Authentication WPS Bridge Setting: AP / Client / WDS mode Advanced Setting | |||
QOS Management | WMM | |||
Firewall | System Firewall
Port Forwarding Traffic Rules | |||
Management | NTP Setting
Remote Management System Log
| Upgrade Firmware
Administrator Setting Schedule |