
Technical Specification
Model |
| Unit | JN-T500 |
Travel | X axis | mm (inch) | 500(19.7) |
Y axis | mm (inch) | 400(15.7) | |
Z axis | mm (inch) | 330(12.9) | |
Spindle nose to table | mm (inch) | 150-480 (5.9-18.9) | |
Spindle centre to solid column surface | mm (inch) | 430(16.9) | |
Table | Working area | mm (inch) | 650’400 (25.6*15.7) |
Max.loading | kg | 350 | |
T-slots(No.*Width*Pitch) | mm (inch) | 3*14*125 (3*0.5*4.9) | |
Spindle | Toot shank | - | BT30 |
Speed | rpm | 12000 (OPT15000) | |
transmission | - | Direct drive | |
Bearing lubrication | - | Grease | |
Cooling system | - | Oil cooled | |
Spindle motor max.rating | kw (HP) | 7.5(10) | |
Axis motor max.rating(MITSUBISHI) | kw | 1.5/1.5/3.0 | |
Axis motor max.rating(FANUC) | kw | 1.8/1.8/2.5 | |
Feed rates | Rapids on X/V/Z axis | m/min | 60/60/60 |
Max. Cutting feedrate | m/min | 12/12/12 | |
Toolmagazine | Tool storage capacity | pcs | 21 |
Type of tool (optional) | type | BT30 | |
Max.tool diameter | mm (inch) | 60 (2.3) turret | |
Max.tool weight | kg | 3 | |
Max.Tool length | mm (inch) | 250 (9.8) turret | |
Avg.changing Time (ARM) | Tool to tool | sec. | 0.35 (60HZ) |
Air source required | kg/cm² | 6 up | |
Accuracy | Positioning (VDI3341) | mm (inch) | 0.01 (0.0004) |
Repeatability (VDI3341) | mm (inch) | 0.005 (0.0002) | |
Dimension | Machine weight(net) | kg | 5000 |
Power source required | kva | 20 | |
Shipping Floor plan(L*W*H) water tank and chip conveyor not included | mm (inch) | 1800*2100*2200(70.8*82.7*86.6) | |
Floor plan (L*W*H) | mm (inch) | 1800*2600*2500(70.8*102.4*98.4) |
Standard Accessories
Fanuc controller
Spindle speed 8000/10000/12000/20000 rpm(depend on machine model)
Note: Due to the continuous research and development of products and continuous technological innovation, the company has the right to change and the right to final interpretation, without prior notice.