Drilling Mud Shale shaker is the first phase screening & separation machinery in solids control system. With over 10years experience in design and manufacturing, MJ heavy duty shale shaker are able to working in most hazardous area for both onshore and offshore drilling activities. Shale shaker with DNV2.7-1 Certificate SKID is available for offshore drilling operations.
Except for DNV certificate SKID, offshore platform have much higher request on paintings because of the corrosive atmosphere with high salt content. We adopt marine anti-corrosive paintings with 3layers for much better performance.
The shale shaker has different configurations to work with different drilling requirements. The two panel shaker can work for small rig drilling operation. The three panel shaker can work with oil drilling / water well drilling / HDD. The four panel shaker can work for oil drilling operation / waste management to achieve much dryer drilling cuttings. When working for drilling cuttings treatment, high G dryer or high G shaker is normally requested. Lower operation cost, lower maintenance cost, the oil on cuttings can be reduced to about 10%. In some other drilling operations, the owner may require to reduce the OOC below 3~5%, and we recommend Vertical cuttings dryer to achieve this target.
Technical Parameters of Flat screen Shale Shaker
|Vibrating Mode||Linear motion||Linear motion||Linear motion||Linear motion|
|Max. Capacity (m3/h)||70||110||140||140|
|Vibrating Motor (kw)||2 x 0.75||2 x 1.5||2 x 1.72||2 x 1.94|
|Adjusting G force (G)||7.0G||7.5G||7.5G||8.0G|
|Vibration Amplitude (mm)||3.92~5.62||4.14~5.96||4.4~6.34||4.4~6.34|
|Screen Qty (pcs)||2||3||4||4|
|Screen Size(mm)||750 x 900||585 x 1165||585 x 1165||585 x 1165|
|Screen Area (m2)||1.35||2.04||2.73||2.73|
|Weir Height (mm)||710||885||885||885|
Technical Features of Flat screen Shale shaker