JKS Waterproof paint- popular type is a two-component waterproof pulp with high impermeability and high adhesion properties. It is made of Inorganic silicate cementitious materials and natural inorganic mineral aggregates combined with organic polymer emulsion
Apply it on the cement base after stirring evenly. It has excellent waterproof performance and high bond performance after it dried, especially suitable for those that need to be waterproof as well as sticked with tiles.Our products comply with criteria of JC/T 2090-2011 polymer cement waterproof paint and A kind of standard JC 1066-2008 Limited hazardous substance of waterproof paint
Especially suitable for the kitchen, toilet, basement, balcony, pool, external wall and other indoor and outdoor waterproofing works. Also can be used in underground garage, shelter, underground tunnel, subway, cave and other underground waterproofing works
Ways to construction:
Base treatment: ensure that the base is firm, free of grease and other loose material before construction. (repair holes and cracks with mortar first.) Moistening the base with water to saturate, then apply construction till there is no water.
Stirring: pour the liquid into a clean container and then with proportion of one bag of powder and one bag of liquid , use electric blender mixing while slowly add powder, fully mixied for 3 ~ 5 minutes until no raw glutinous rice dough to form a thick paste. wait for 3 minutes and stir for 1 minute,then can be used.
Construction: Use a brush or roller to paint at least two layers. The coating direction of the second layer shall be perpendicular to the first layer, and the construction shall be carried out after the first layer dried (about 2-8 hours). The temperature, humidity and ventilation of the construction site will directly affect the drying time.The thickness of each coating should not be too thick to more than 1mm to facilitate curing.
Subsequent construction time: It usually takes about 48 ~ 72 hours to construction after the surface is completely hardened.Try to avoid sharp objects to damage the waterproof layer.
Dosage: about 1.5 ~ 2 kg / for 1mm thickness (according to the standard of waterproof and base)
Construction environment temperature should be 5 - 35 . Keep out of the rain within 24 hours . Avoid soaking in water within 72 hours. In case of low temperature and high humidity, it is necessary to extend the maintenance time to obtain the best coating effect.
For the yin-yang Angle and the pipe area, the water should be used before construction to be pre-processed into circular arc or obtuse Angle.Using non-woven fabric or alkali-resistant fiberglass mesh fabric to enhance the treatment flexible waterproof material..
Do not add water or add other substances. Use ceramic tile glue when stick tile on waterproof layer. The surface of waterproof layer should not be too smooth.
Please try to avoid wet weather if make construction in the basement.
Before construction, please read the construction instructions carefully to obtain reliable and satisfactory construction results.
How to Store