PTFE breathable fabric,Peel Ply PTFE Cloth

PTFE breathable fabric,Peel Ply PTFE Cloth

• Dimensional stability, high strength, lengthening coefficient is less than 5%;
• High temperature resistance, continuous operating temperature is -70-260 , can resist up to320 in a short time
• Skin friction coefficient is low, good insulating property;
• Resistance to bond, easy to clean all kinds of oil stain, dirty spot or other attached in the surface;
• Excellent resistance of all kind of strong acidic or alkaline corrosion, no burning, endurable to aging.

Porous Ptfe Coated Glass

• Thickness: .003"
• Width: 50
• Weight:70g/m²
• Color:Brown/White

Non-porous Ptfe Certified Glass

The Non-porous Ptfe Certified Glass Epoxy Mixing Sheet provides an non-stick, smooth surface. The Non-porous surface will not retain resin.

• Thickness: .005"
• Width: 50
• Weight:165g/m
• Color:Brown/White

This glass cloth has been coated with Ptfe form a porous non- bondable fabric that can be used to control the resin content of a laminate during the bagging operation. It is applied directly over the uncured, epoxy impregnated glass, and then covered with a breather mat that will absorb the excess resin. The amount of resin removed is contingent upon the number of layers of bleeder felt used.

• Thickness: .003"
• Width: 50
• Color:Brown

Non-porous Ptfe Certified Glass

The Non-porous Ptfe Certified Glass Epoxy Mixing Sheet provides an non-stick, smooth surface. The Non-porous surface will not retain resin.