Call Us
Call Us
+8618010680219

RUBBER GROMMET

RUBBER GROMMET
RUBBER GROMMET
Send Inquiry
Product Code : JYX
Price And Quantity
  • Minimum Order Quantity
  • 100 Piece
  • Price
  • 0.5-9999 USD ($)
Product Specifications
  • Product Type
  • RUBBER GROMMET
Product Description

FORMED HOSE PIPE

Rubber hoses or Formed hoses usually constructed with an inner tube,layer of reinforcement and an outer cover,handle fluid transport and containment in countless products.

HYDRAULIC SEAL

A hydraulic seal is a relatively soft,rusher ring,captured in a groove or fixed in a combination of rings,forming a seal assembly,to block or separate fluid in reciprocating motion A hydraulic seal is a relatively soft rubber ring captured in a groove or fixed in a combination of rings,forming a seal assembly,to block or separate fluid in reciprocating motion applications.

PLASTIC PARTS

Plastic Prats offers a variety of automobile parts including washers,bumper,bush,ring and many more.

RUBBER COUPLING

A rubber coupling is a device used to connect two shafts together at their ends for the purpose of transmitting power.

WHEELS & IDLERS

An idler-wheel drive is a system used to transmit the rotation of the main shaft of a motor to another rotating device.

VIBRATION ISOLATOR

Vibration isolation are used to isolating an object,such as a piece of equipment,from the source of vibrations.

RUBBER PADS & MATS

Rubber Pads & Mats is a specially compounded & designed to isolate vibration,resist or conduct electricity depending upon required conditions,Also made with FDA approved ingredients for kitchen use.

RUBBER TO PTFE BONDED

PTFE rubber composite seals and gaskets have been used extensively in food processing where they allow processing of different foods without the risk of contamination from one product to another,due to the non-taint properties.In oil & gas it is used to resist any chemical etc.

SILENT BLOCKS

A’’silent block’’ is a block made of a flexible material like rubber and metal to absorb vibrations and shocks.

SUCTION CUP

A suction cup,is an object that uses negative fluid pressure of air or water to adhere to nonporous surfaces and in the process creates a partial vacuum.

PLASTIC FILTER

The filters are actually molded into the plastic part.Share Filtration can use plastic or stainless screens in the molding process.Depending on the size of the part a multi-cavity mold can be manufactured to increase production.

GASKET

King rubber offers rubber gasket in a variety of elastomers,sizes and shapes.All of our rubber gaskets are custom designed for your particular application enabling us to meet almost any specification.

CUSTOM MOLDED RUBBER

Our team will work with you from product concept to prototype and design development including rubber compound selection compression and stack up recommendations through the ongoing production of precision custom molded rubber products.

CUSTOM RUBBER SEAL

King rubber specializes in the design and manufacturing custom rubber sealing devices for both static and dynamic applications.Our rubber seals can be manufactured in a variety of shapes sizes and elastomers depending on your specific application.

CENTER BEARING HOUSING

This parts is designed specifically for your vehicle and has undergone extensive laboratory and on-the-road testing.

CONVOLUTED BELLOW

King rubber bellows and convoluted rubber dust boots are versatile seals used in a wide range of applications to seal dust and other environment elements in applications with a designed range of motion.

BUTTERFLY VALVE SEAL

The butterfly valve seal is an indispensable component to seal off all three possible leakage routes-the pipe seal,the flange seal and the operating shaft seal in shut-off valves,flap or disk valves.

CALBE GROMMET

King rubber manufacturing a variety of rubber grommets in varying materials,shapes and sizes.All of our rubber grommets are custom designed for your application enabling us to almost any specification.

Trade Information
  • Payment Terms
  • Telegraphic Transfer (T/T), Letter of Credit at Sight (Sight L/C), Delivery Point (DP), Days after Acceptance (DA)
  • Supply Ability
  • 10000 Piece Per Month
  • Delivery Time
  • 20-30 Days
  • Sample Available
  • Yes
  • Sample Policy
  • Contact us for information regarding our sample policy
  • Main Export Market(s)
  • Africa, Middle East, Western Europe, Eastern Europe, South America, North America, Central America, Australia, Asia

GLOBALTRADE
X


"We are looking for Export Inquiries"